by Eamonn Boylan | Nov 18, 2025
MBT couplers require neither bar end preparation to form threads nor bar rotation to effect installation. The bars are supported within the coupler by two serrated saddles.
by Eamonn Boylan | Nov 18, 2025
Ancon AMR-CJ masonry reinforcement allows the construction of collar-jointed walls i.e. two leaves of thin masonry used in place of a single leaf of wider, heavier blockwork. Ancon AMR-CJ is used to tie the two leaves together, so it acts as a single unit.
by Eamonn Boylan | Nov 18, 2025
Ancon AMR ‘Ladder Type’ Masonry Reinforcement is a fabricated steel reinforcement system that is located in the bed joint to strengthen masonry panels without thickening the wall.
by Eamonn Boylan | Nov 18, 2025
by Eamonn Boylan | Nov 18, 2025
Ancon MDC Brackets and the spacing, depth and height can be varied to suit loading conditions, fixing position and cavity width. Ancon MDC Shims are available to provide the extra adjustment when fixing brackets with the Masonry support system.
by Eamonn Boylan | Nov 18, 2025
Ancon Windposts are designed to span vertically between floors to provide lateral support for panels of brickwork. Windposts can be installed into either the inner leaf of blockwork or into the cavity leaving the blockwork undisturbed.
by Eamonn Boylan | Nov 18, 2025
Debonded ties require 100mm embedment. A 120mm long sleeve will provide an allowance for movement and tolerance, and will be suitable for most applications.
by Eamonn Boylan | Nov 18, 2025
Low density expansion and movement joint fillers are ideal for use in brickwork and blockwork due to their low compressive strengths.
by Eamonn Boylan | Nov 18, 2025
The two part design of all Ancon shear connectors removes the need for drilling formwork on site, supporting dowel bars and fitting debonding sleeves and end caps
by Eamonn Boylan | Nov 18, 2025
Eazistrip Reinforcement Continuity Systems are designed to maintain continuity of reinforcement at construction joints in concrete.
