by Eamonn Boylan | Nov 18, 2025
The unique tangle free design of the TecTies Type 2 General Purpose Tie is specifically designed for masonry cavity walls in domestic houses and small commercial buildings of up to a maximum 15m in height.
by Eamonn Boylan | Nov 18, 2025
This product is designed to restrain non structural elements such as Door Frames and Window Frames to masonry. Designed with one 10mm and two 6mm diameter holes for screw fixing, bolting or shotfiring in a standard 50mm upstand and safety end detail for embedment....
by Eamonn Boylan | Nov 18, 2025
This product is designed to restrain non structural elements such as Door Frames and Window Frames to masonry. Designed with one 10mm and two 6mm diameter holes for screw fixing, bolting or shotfiring in a standard 50mm upstand and safety end detail for embedment....
by Eamonn Boylan | Nov 18, 2025
Debonding Sleeves are placed onto Movement Ties and located over the embedment detail to allow the tie to move.
by Eamonn Boylan | Nov 18, 2025
These products are designed to provide restraint in one direction and movement to allow for horizontal expansion and contraction. The Debonding Sleeve is located over the embedment detail to allow the tie to move. Typical usages are in areas where masonry is...
by Eamonn Boylan | Nov 18, 2025
The TTIHR Head Restraint is designed to restrain the top of the inner leaf of cavity walls. Allows vertical movement between the inner leaf and the structure by using a rectangular sleeve which sits in the vertical joint and a top section bolted to the soffit designed...
by Eamonn Boylan | Nov 18, 2025
The TTFHR Head Restraint is designed to restrain the top of the inner leaf of cavity walls. The restraint consists of two angles fixed using a single M8 bolt which effectively clamp the top of the wall.
by Eamonn Boylan | Nov 18, 2025
The TTFHR Head Restraint is designed to restrain the top of the inner leaf of cavity walls. The restraint consists of two angles fixed using a single M8 bolt which effectively clamp the top of the wall.
by Eamonn Boylan | Nov 18, 2025
Tecties Reveal Support Plate offers an essential foundation for window reveals during construction. Its long leg is designed to fit securely into the bed joint of the outer leaf with an arrow pointing towards the reveal to ensure its stability.
by Eamonn Boylan | Nov 18, 2025
This product is designed to provide tensile strength to brickwork to prevent cracking in non structural applications. The Brickwork Reinforcement should be mortared into the bed joint with its outer edge about 25mm from the face of the masonry and if overlaps are...
