by Eamonn Boylan | Nov 18, 2025
This product is designed as a reinforcement system to strengthen brickwork and blockwork in structural load applications. The Ladder Reinforcement should be mortared into the bed joint ensuring that laps are a minimum of 225mm in length and staggered throughout the...
by Eamonn Boylan | Nov 18, 2025
Kooltherm K112 is a premium performance insulation for timber and steel framing systems. With a thermal conductivity of 0.019 W/mk, it allows target U-values to be reached with minimal thickness of insulation. The boards can be used between studs or as an insulating...
by Eamonn Boylan | Nov 18, 2025
Kooltherm K108 is a premium performance partial fill cavity wall insulation solution. It has a thermal conductivity of 0.019 W/mK and can achieve the same wall U-value as alternative products with a thinner profile. Its low thermal conductivity can maximise usable...
by Eamonn Boylan | Nov 18, 2025
Kooltherm K107 is a premium performance pitched roof insulation board. Suitable for use in tiled or slated pitched roofs, dwarf walls, attic floors, dormer windows and flat ceilings. The insulation boards can be simply retrofitted when converting an attic where...
by Eamonn Boylan | Nov 18, 2025
Kooltherm K106 is a premium performance full fill cavity wall insulation solution, with a 10 mm residual cavity. It has a thermal conductivity of 0.019 W/mK and can achieve the same wall U-value as alternative products, with a thinner profile. Kooltherm K106 has a...
by Eamonn Boylan | Nov 18, 2025
Kooltherm K103 is a premium performance floor insulation solution, for use with solid concrete or suspended timber floors. It has a thermal conductivity of 0.019 W/mK and is ideal for both new build and refurbishment projects.
by Eamonn Boylan | Nov 18, 2025
In slender flat slabs supported by point columns, there is a risk of punching shear failure at the columns. Schöck Bole® addresses this challenge as a reliable and cost-effective punching shear reinforcement solution.
by Eamonn Boylan | Nov 18, 2025
In concrete slabs or retaining walls, the transfer of shear forces in expansion joints is often complex. Conventional solutions require time-consuming measures. The Schöck Stacon shear dowels enable a simple and reliable transfer of shear forces.
by Eamonn Boylan | Nov 18, 2025
Load-bearing thermal insulation elements for the connection of freely cantilevered steel constructions to steel structures. The element consists of the S-N and S-V modules and, depending on the module arrangement, transfers moments, shear forces and normal...
by Eamonn Boylan | Nov 18, 2025
Load-bearing thermal insulation element for freely cantilevered steel structures with connection to reinforced concrete ceilings. The element transfers moments and shear forces.
